Stone Restoration by Adriatic

What Can Damage Your Stone or Brick Walls?

Stucco and brick are super durable, ideal for commercial businesses. But they aren’t indestructible and any building made of these materials will eventually need repairs. Here are a few things that can land you shopping for stone repairs in Alpine, NJ.

Water Damage

Have you seen stucco tears in your building’s walls? This is a sign of water damage usually due to failure of sealing in parts where the stucco meets other joints.

Foundation Changes

Over time, the soil beneath your building compresses and the foundation settles leading to vertical cracks in your stucco walls.

Weather

Brick, stucco and stone in general are considered weatherproof building materials. However, enough wind, heavy rains, and humidity can weaken even these tough materials over time, leaving you needing brick repairs in Alpine, NJ.

Vibrations

Those rumbling vibrations from construction sites are more than a nuisance. They can cause external vibrations that can crack your stucco siding.

Thermal Expansion

Heat can also damage brick via thermal expansion of long brick walls lacking expansion joints. This can result from sun exposure.

When any of the above has taken its toll on your stone walls, it’s time to find a qualified specialist in brick, stone or stucco repairs in Alpine, NJ to get your building looking like new.

Steps to Painting a Concrete Deck

When it’s brand new, it’s hard to believe your clean concrete deck could ever get dirty. But before long, foot traffic and more can give it a gray pallor. Ready to spruce things up? Here are five quick steps for concrete deck painting.

Gather the Right Tools

Plan on investing in specialized concrete paint for decks. You’ll also need masonry sealant and primer, a clear finishing sealant to apply after painting and naturally, a sprayer or several rollers.

Clean Your Deck

The only thing worse than a dirty concrete deck is one with painted on debris. Avoid this by sweeping your deck thoroughly. Next wash your deck down with grease cutting soap, rinse and dry.

Fix Repairs

Concrete deck painting over cracks is bad practice, so plan to repair any minor nicks before you paint.  Clean cracks with a wire brush or vacuum and fill with masonry crack filler.

Paint

Following the directions for your products, apply masonry sealant and primer onto the deck directly and spread over a few square feet at a time.

You’ll need to wait 24 hours for the paint to dry before applying sealant. If this all sounds like a lot of work, choose instead a knowledgeable concrete deck painting contractor in NJ and NY with years of experience. You won’t regret it!

Parking Garage Restoration

5 Reasons You Should Waterproof Your Parking Garage in 2019

Waterproofing might not seem like a natural priority for a parking garage, especially if it’s covered. But water is the top threat that faces garages in the long run, creating rust, corrosion and freeze-thaw cycles that can generally destroy a structure. Parking garage waterproofing is an investment that will benefit you thoroughly in the long run. Here are the top five reasons to waterproof your parking garage.

  • Cracks and Spalls

Water getting into a garage can penetrate concrete, freezing and expanding or introducing erosive chlorine and chemicals. The result is cracking and crumbling.

  • Poor Drainage

Water that gets into a garage often pools and forms puddles that are frustrating and even dangerous for drivers.

  • Weakened Structure

Water can gradually erode reinforced steel as well as joint sealants between fixtures and concrete floors. This can create a dangerous weakening of your structure.

  • Damaged Cars

Water can contain chemicals and even salt that, if allowed to drop or splash onto cars in a parking garage, can begin to damage auto paint.

Simply put, water is one of the biggest threats to a well-functioning parking garage. A waterproof parking deck creates a better experience overall. Get ahead of the threats posed by this element by working with a reputable company with experience in parking garage waterproofing well before you see the telltale signs of water damage.

3 Reasons Not to Ignore Masonry Issues

The beautiful stonework and masonry facades that decorate landmark buildings, hi rises, office buildings and many other types of commercial structures may look indestructible, but that isn’t the truth. Beneath the surface, cracks and fissures can create damage that slowly becomes irreversible. Here are a few reasons why investing in masonry restoration in NJ now is a good way to protect your building in the future.

Masonry Damage Threatens the Entire Structure

Left untreated, masonry damage can slowly destroy a building. Just one small crack can let in water, which then freezes and thaws, making holes and cracks. Masonry restoration contractors know firsthand that this eventually weakens the entire structure.

It Can Lower Property Value

Damaged stonework and masonry can signal a weakened structure and even suggests decreased energy efficiency from a building that lets out heat. The prospect of repairing the damage can dissuade would-be buyers.

Damage Can Cause an Accident

In older cities especially, it’s not uncommon for compromised stonework to fall off hi rise buildings. This can damage vehicles or even injure a passerby, creating a major liability.

Don’t let your commercial building fall into ruins. Contact a specialist in masonry restoration in NJ today to learn your options for keeping your property attractive and efficient.

Stucco Repair

Why Is Regular Stucco EIFS Repair Essential for Your Property?

It’s important to ensure you repair stucco EIFS on your buildings anytime they suffer any damage that harms the structural integrity of the EIFS. Cladding a structure with stucco EIFS helps it to maintain temperature better, lowering your energy costs, while also serving to waterproof the building to avoid any potentially costly water damage. All of these benefits can go away if it is not properly maintained, however. If your buildings have stucco EIFS, here are the top reasons to make sure that you are getting regular maintenance and promptly ordering any necessary repairs when damage is discovered.

  • Ordering repairs when a problem is small prevents it from developing into a problem that is much bigger and significantly more expensive to repair.
  • Damage to your building’s stucco EIFS can harm the effectiveness of your EIFS which can lead to other costly losses.
  • Regular maintenance and repair keep your stucco EIFS looking its best, which is essential for maintaining an attractive look to your building’s occupants and visitors.

When it’s time to repair stucco EIFS on your properties, you need to find professionals you can trust to get the job done right and done on time. Adriatic Restoration provides stucco EIFS repair for landmark buildings, office buildings, hi-rises, apartments and commercial building.

Can Flashing Solve Your Leaky Window Problem?

Water, snow, air – it all can seep into windows and cause destruction, especially in older, landmark buildings. Sealing may be the go to solution, but often the real answer lies in window flashing. Learn how window flashing works and whether it’s the answer to your building’s aluminum window waterproofing needs.

Understanding Flashing

Flashing is a thin strip that stops water penetration via the angles common near windows. Some builders think siding or standard facades can perform this function, but that’s simply not true. Flashing materials include:

  • Tape
  • Sheet metal
  • Vinyl

We know what flashing is, but when do you need it?

When There’s Mold

Rot and mold near a window is a telltale sign of water leaking and a clue that flashing can help. This is especially common for older buildings where caulk was used instead of flashing. Ignoring this can allow mold and rot to worsen and become a more costly problem.

When Windows Lack Channels

Some types of windows designed with built-in channels don’t need flashing. Those let water channel out and away from your building rather than seeping in. If your windows don’t have this built in, flashing is a good option.

Flashing is a best practice in aluminum window waterproofing, and some codes even require it. But if your building is older, it may not have it. If you’re facing mold, leaks and other signs of weather infiltration, call a window refinishing contractor to see if flashing installation can help.

My Window Gaskets Failed – Do I Need New Windows?

Many components help windows keep out air, water and debris, including their gaskets. When these deteriorate, windows are no longer able to do their job of keeping what’s outside from getting inside. Window replacement may seem inevitable, but there are cheaper options like aluminum window gasket repair. Learn more about fixing the windows on your commercial property for less.

What Are Gaskets

Often made of materials like aluminum, rubber or neoprene, gaskets cushion your windows glazing. Poor gasket performance can result in things like:

  • Leaks
  • Drafty rooms
  • Higher utility bills

When gaskets fail, window replacement is often the answer. But not always.

Gasket Replacement

Replacing aluminum window gaskets is one affordable option.  Simply remove existing perimeter gaskets and install new ones. This may occasionally require removing glazing, which can be costly. But it’s still cheaper than replacing all of your windows.

Sealants

Sometimes windows are too old for gasket replacement and that’s when sealants can come into play. Repairs involve cutting a portion of the gasket bulb and replacing with elastomeric sealant. Be aware that sealant will require maintenance, so it’s not a permanent fix.

Leaky windows are an expensive pain, but replacing them isn’t the only answer. Consider aluminum window gasket repair or sealant before you pour money into such a pricey fix.